EMC Screws Rep-Alg-Rag1141-4104101 - V.2 (M4 2021-2023)

(EMC = electromagnetic compatibility)

1. Purpose  :
   • EMC SCREWS  are used in the bonding/riveting repair method to re-establish bonding transition.
   • They adopt the task of welded connections or self-tapping screws, which handle bonding transition between the individual components in series production.
   • The punch or blind rivets used in the repair do not guarantee permanent bonding transition between the individual components!
   • The EMC screws ensure the operational reliability and safety of the electrical/electronic components following repairs!
2. Procedure  :
   • Install the number of EMC screws described in the repair instructions.
   • Drill holes to a diameter of 4.2 mm and insert screws.
   • Seal EMC screws with PU seal material (risk of corrosion).