Installing The Rear Outer Wheel Arch Section

Install new part and weld in the areas (1) and (2).
In the area (2), set the repair spot-welds on the production spot-welds.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Installation of a cavity sealing (not expanding)
Apply sealant D1 on the new cavity sealings (1). Install cavity sealings (1).
CONSUMABLE SPECIFICATION

Sealant D1 (seam sealing) 310 ml 83422409985

Courtesy of BMW OF NORTH AMERICA, INC.