Install Wheel Arch

Preclean all bonding surfaces with solvent cleaner R2.
CONSUMABLE SPECIFICATION

Cleaning agent R2 500 ml 83190417324
Clean all bonding surfaces with solvent cleaner R1.
CONSUMABLE SPECIFICATION

Cleaning agent R1 100 ml, Bottle 83192211217
Apply adhesive K1 to bonding surfaces.
ADHESIVE SPECIFICATION

Body adhesive K1 195 ml 83190413015
Install the new parts with an alignment bracket or a universal mount.
During installation, ensure that sufficient adhesive has been applied to all bonding surfaces.
Rivet the new part in the areas (1) and (2) with blind rivets N2.
CONSUMABLE SPECIFICATION

Blind rivet N2
ø 6.5 mm; clamping area 4.8-6.8 mm 83190301419

Courtesy of BMW OF NORTH AMERICA, INC.
Rivet the new part in the areas (1) and (2) with blind rivets N1.
CONSUMABLE SPECIFICATION

Blind rivet N1
ø 6.5 mm; clamping area 2.8-4.8 mm 83190301414

Courtesy of BMW OF NORTH AMERICA, INC.
Rivet the new part in the areas (1) with blind rivets N1.
CONSUMABLE SPECIFICATION

Blind rivet N1
ø 6.5 mm; clamping area 2.8-4.8 mm 83190301414

Courtesy of BMW OF NORTH AMERICA, INC.
Rivet the new part in the areas (1) with blind rivets N1.
CONSUMABLE SPECIFICATION

Blind rivet N1
ø 6.5 mm; clamping area 2.8-4.8 mm 83190301414

Courtesy of BMW OF NORTH AMERICA, INC.
Clean all bonding surfaces with solvent cleaners R2 and R1.
Apply adhesive K1 to bonding surfaces.
Join the new parts and rivet the in the areas (1) with blind rivets N1.
CONSUMABLE SPECIFICATION

Blind rivet N1
ø 6.5 mm; clamping area 2.8-4.8 mm 83190301414

Courtesy of BMW OF NORTH AMERICA, INC.
Clean all bonding surfaces with solvent cleaners R2 and R1.
Apply adhesive K1 to bonding surfaces.
Install the new parts and rivet them with blind rivets N1 in the area (1).
CONSUMABLE SPECIFICATION

Blind rivet N1
ø 6.5 mm; clamping area 2.8-4.8 mm 83190301414

Courtesy of BMW OF NORTH AMERICA, INC.
Rivet the new part in the area (1) with blind rivets N1.
CONSUMABLE SPECIFICATION

Blind rivet N1
ø 6.5 mm; clamping area 2.8-4.8 mm 83190301414

Courtesy of BMW OF NORTH AMERICA, INC.
Rivet the new part in the area (1) with blind rivets N2.
CONSUMABLE SPECIFICATION

Blind rivet N2
ø 6.5 mm; clamping area 4.8-6.8 mm 83190301419

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Installation of a cavity sealing (not expanding)
Apply sealant D1to the cavity sealing (1) and install the cavity sealing.
CONSUMABLE SPECIFICATION

Sealant D1 (seam sealing) 310 ml 83422409985

Courtesy of BMW OF NORTH AMERICA, INC.
Clean the bonding surface (1) with solvent cleaners R2 and R1.
Apply adhesive K1 to the bonding surface (1).
Apply sealant D1 to the cavity sealing (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Install the new part and rivet it in the areas (1) and (2) with punch rivets N4.

Area	Description	Number
1	N4	8
2	N4	8

CONSUMABLE SPECIFICATION

Punch rivet N4
0 3 mm; 4 mm long

83192457307

Courtesy of BMW OF NORTH AMERICA, INC.

Rivet the new part in the area (1) with blind rivets N1.
CONSUMABLE SPECIFICATION

Blind rivet N1
ø 6.5 mm; clamping area 2.8-4.8 mm 83190301414

Courtesy of BMW OF NORTH AMERICA, INC.
In the bonding surface (1), set 3 punch rivets N4 according to the illustration.
CONSUMABLE SPECIFICATION

Punch rivet N4
ø 3 mm; 4 mm long 83192457307
Install the reinforcement plates (2) and attach by welding.

Courtesy of BMW OF NORTH AMERICA, INC.
Install the new part section and weld it in the areas (1) through (3).
When doing so, pay attention to the adhesive area (4) of the aluminum spring support. Avoid high heat input in the adhesive area.

Courtesy of BMW OF NORTH AMERICA, INC.
Clean the bonding surface (2) with solvent cleaners R2 and R1.
Apply adhesive K1 to the bonding surface (2).
Attach the bracket (1) and rivet it with blind rivets N1.
CONSUMABLE SPECIFICATION

Blind rivet N1
ø 6.5 mm; clamping area 2.8-4.8 mm 83190301414

Courtesy of BMW OF NORTH AMERICA, INC.
Mount two EMC screws in areas (1).
CONSUMABLE SPECIFICATION

screw
EMC screw, SF Plus, M5x15 83190301639

Courtesy of BMW OF NORTH AMERICA, INC.