33 52 REAR SHOCK ABSORBERS (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
3352 TIGHTENING TORQUE OVERVIEW
| Nut and locknut/self-locking nut | ||
| M8x40 Replace screw |
Tightening torque | 28 Nm |
| Rear shock absorber to the camber control arm | ||
| M12 Replace screw and nut Tighten in the NORMAL POSITION . Tightening via nut |
Tightening torque | 100 Nm |
| Angle of rotation | 90° | |
| Support bearing on shock absorber | ||
| M14 Replace nut |
Tightening torque | 38 Nm |