33 41 REAR WHEEL BEARINGS (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
3341 TIGHTENING TORQUE OVERVIEW
| Output shaft to wheel bearing | ||
| M16 Replace the collar screw |
Joining torque | 210 Nm |
| Angle of rotation | 90° | |
| Wheel bearing to wheel carrier | ||
| M12 Replace spherical-collar screw Tighten the spherical-collar screws in crosswise sequence The tightening sequence must strictly be followed and carried out on all spherical-collar screws at the same time! Initial torque Hand-tighten all spherical-collar screws crosswise |
Tightening torque | 120 Nm |
| Angle of rotation | 90° | |