(Securing the anti-roll bar link on the left and right to the anti-roll bar)
NOTE:
Perform the steps on the right and left side
Securing the anti-roll bar link to the anti-roll bar
- Position the anti-roll bar link on the anti-roll bar (2)
- Replace nut (1)
Parts: Nut
- Tighten nut (1). If necessary, counter support at the Torx socket
(TIGHTENING TORQUE SPECIFICATIONS)
| Front anti-roll bar link to anti-roll bar/spring strut | ||
| M10 Replace nut |
Tightening torque | 56 Nm |
NOTE:
Perform the steps on the right and left side
- Feed in and position the anti-roll bar link (2) on the left on the anti-roll bar (3)
- Replace nut (1)
Parts: Nut
- Tighten nut (1)
NOTE:
Counter-hold at the Torx socket
(TIGHTENING TORQUE SPECIFICATIONS)
| Front anti-roll bar link to anti-roll bar/spring strut | ||
| M10 Replace nut |
Tightening torque | 56 Nm |
- Feed in and position the anti-roll bar link (2) on the right on the anti-roll bar (3)
- Replace nut (1)
Parts: Nut
- Tighten nut (1)
NOTE:
Counter-hold at the Torx socket
(TIGHTENING TORQUE SPECIFICATIONS)
| Front anti-roll bar link to anti-roll bar/spring strut | ||
| M10 Replace nut |
Tightening torque | 56 Nm |
NOTE:
Perform the steps on the right and left side
Securing the anti-roll bar link to the anti-roll bar
- Position the anti-roll bar link on the anti-roll bar
- Replace nut (1)
Parts: Nut
- Tighten nut (1). If necessary, counter support at the Torx socket
(TIGHTENING TORQUE SPECIFICATIONS)
| Front anti-roll bar link to anti-roll bar/spring strut | ||
| M10 Replace nut |
Tightening torque | 56 Nm |