(Disconnect the bleeder unit for the brake fluid (after part exchange))

NOTE: RISK OF DAMAGE 
Paint damage 
Mechanical or chemical action may lead to paint damage 

• Cover up working area with specified covering material only

• Switch off bleeder unit (1) and remove it from the brake fluid expansion tank
• Check the brake fluid level and adjust it to the maximum mark if necessary

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check the seal of sealing cap (1) to ensure that it fits correctly and check for damage; if necessary, replace it
• Close the sealing cap (1)

Courtesy of BMW OF NORTH AMERICA, INC.