Connect diagnostic system/Brake bleeding procedure service function

NOTE: TECHNICAL INFORMATION
Before first working on the DSCi brake (integrated brake), the "DSCi" web-based training must be passed successfully
The "DSCi" web-based training is started in the Learning Management System (TMSi)

NOTE: TECHNICAL INFORMATION
Use only BMW-approved brake fluids. See the Fluid Capacities tab for the selected vehicle.

Preliminary work

Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
Refer to CONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .

Connect diagnostic system:
- Service functions
- Chassis
- Traction control systems
- Brake bleeding procedure
Work through the instructions in the service function in sequence

Follow-up work

Refer to DISCONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .
Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .