Installing the window guide bar trim

• Insert the window guide bar trim (2) in the door
• Tighten down screws (3)
  TIGHTENING TORQUES SPECIFICATION
  
  

  Trim for window guide web on door frame
  Oval-head screw M4x8	Tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Thread the rubber window seal (1) into the window guide bar trim (2)

Follow-up work 

• Refer to INSTALLING WINDOW CHANNEL STRIP ON THE REAR DOOR .
• Refer to INSTALLING THE WINDOW CHANNEL STRIP OF THE INNER REAR DOOR .
• Refer to INSTALLING THE COVER ON THE INSIDE OF THE WINDOW FRAME AT THE REAR .
• Refer to INSTALLING THE REAR DOOR TRIM PANEL .