Remove the guide for the rear bumper panel on the side

Preliminary work 

• Refer to IF INSTALLED: REMOVING THE LANE CHANGE WARNING SENSOR .
• Refer to IF INSTALLED: REMOVING EMERGENCY HORN (ADDITIONAL WORK FOR ANTI-THEFT ALARM SYSTEM) .

• Loosen nuts (1)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Open the lock (1)
• Unclip the clips (2) of the vehicle wiring harness and the place the wiring harness aside
• Remove the guide (3) for the rear bumper cover on the side

  Courtesy of BMW OF NORTH AMERICA, INC.