(Removing the covers for the interior rearview mirror)

• Version A: 
• Release cover (1) in the middle with a suitable plastic wedge from the latch mechanisms and remove

  Courtesy of BMW OF NORTH AMERICA, INC.

• Version B: 
• Release the cover panel (1) from the detents (2) with a suitable plastic wedge and remove laterally

  Courtesy of BMW OF NORTH AMERICA, INC.

• Version C: 
• Release cover (1) from the clamps (2) in the marked area using a suitable plastic wedge and pull down a certain distance
• Release cover (1) at the retaining lugs (3) and remove from the guides to the rear

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release cover (1) from the detents (2) and (3) and remove sideways
• Remove cover (1) from mirror base (2)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Version D: 
• Release covers (1) and (2) using a suitable plastic wedge at the separation point (3) and remove to the side

Courtesy of BMW OF NORTH AMERICA, INC.