(Installing the trim in the water channel on the left and right)
NOTE:
Description is for left component only. Procedure on the right side is identical
Installing the trim in the water channel
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details
Check
- Check the clips (2) for damage and replace them if necessary
- Check guides (3) for damage
Result
» The guides are damaged
Measure
- Replace the trim
Parts: trim
- Insert the trim (1) into the guides (3)
- Clip the trim (1) into the ball hubs (2) from above
NOTE:
Description is for left component only. Procedure on the right side is identical
→ Installing the trim in the water channel
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details
Check
- Check the clips (2) for damage and replace them if necessary
- Check guides (3) for damage
Result
» The guides are damaged
Measure
- Replace the trim
Parts: trim
- Insert the trim (1) into the guides (3)
- Clip the trim (1) into the ball hubs (2) from above