Installing the front emblem
- Replace the emblem
Parts: Emblem
- Clean the adhesive area on the hoodCONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324 - Check the guide pins (1) of the emblem for damage
- Check grommets (2) for damage and, if necessary, replace grommets (2)
- Coat the guide pins (2) of the emblem (1) with lubricantINSTALLATION AID SPECIFICATION
Lubricants G14 900 ml, Can 83232360412 - Detach the liner from the bonding surfaces of the emblem (1)
- Insert emblem (1) in the nozzles with guide pins (2) and press on it all around