Removing the instrument cluster
NOTE:
RISK OF DAMAGE
Electrostatic discharge
Damage to or destruction of electrical components
Electrostatic discharge
Damage to or destruction of electrical components
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away
- Read and comply with user information on using the associated special tool 12 7 060
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol)
- For additional information see: 61 35... NOTES on ESD (electrostatic discharge) protection
Preliminary work
- Refer to ADJUSTING THE STEERING COLUMN POSITION .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING STEERING COLUMN SHROUD UPPER SECTION .
- Refer to REMOVING THE GAP COVER .
NOTE:
RISK OF DAMAGE
Electrostatic discharge
Damage to or destruction of electrical components
Electrostatic discharge
Damage to or destruction of electrical components
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away
- Read and comply with user information on using the associated special tool 12 7 060
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol)
- For additional information see: 61 35... NOTES on ESD (electrostatic discharge) protection
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components
Scratches, surface damage
Careless handling of tools and sharp-edged components
Scratches, surface damage
- Protect working area
- Handle tools and components carefully
NOTE:
RISK OF DAMAGE
Damage of high-quality surfaces
Plastic wedges can damage high-quality surfaces
Damage of high-quality surfaces
Plastic wedges can damage high-quality surfaces
- Protect surfaces from damage
- Unclip the cover (1) on the instrument cluster (2)
- Loosen screw (3)
- Release the screws (1)
on the instrument cluster (2)
- Fir the plastic adhesive tape (1)
on to the decorative strip (2) CONSUMABLE SPECIFICATION
Yellow plastic adhesive tape 83199410979 NOTE: RISK OF DAMAGE
Damage to the component
Excessive force may damage the component- Handle component carefully
- Pull the instrument cluster (1) manually in arrow direction (A) and build up slight preload
- Slide the instrument cluster (1)
manually upwards in arrow direction (B) NOTE: RISK OF DAMAGE
Damage to the component
Excessive force may damage the component- Handle component carefully
- Pull the instrument cluster (1) manually in arrow direction (A) and build up slight preload
- Slide the instrument cluster (1)
manually upwards in arrow direction (B) NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person - Feed the instrument cluster (1)
upwards with the hook (2)
out from the clamps (3) NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person - Unlock plug connections (1) and disconnect
- Feed out the cable (2) from the holders (arrows)
- Unclip all cable brackets (3)
- Feed out and remove the instrument cluster (4)