Removing C-pillar trim panel
NOTE:
Description is for left component only. Procedure on the right side is identical
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details
- Unclip the clamp (4)
- Unclip clips (3)
- Guide out the C-pillar trim panel (2) from the guides to the front
- Feed the C-pillar trim panel (2) out of the lip of edge protection (1)
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- If applicable, remove the clips (1) and the clamp (2) and insert on the trim panel
 Courtesy of BMW OF NORTH AMERICA, INC.
|