Tightening the screw connection of the shock absorber on the camber control arm

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Tighten the screw connection in the normal position.

Release nut (1) and tighten it by a turn. Provide counter support to the screw in the process.

TIGHTENING TORQUES SPECIFICATION

Shock absorber to camber control arm
M12 Replace nut and screw. Tighten in normal position.	Joining torque	100 Nm
	Angle of rotation	90°

Courtesy of BMW OF NORTH AMERICA, INC.