Installing inner cover on front seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the cover (2) from the rear and position it.
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Seat trim to seat frame |
| Sheet metal screw |
tightening torque |
2.5 Nm |
TIGHTENING TORQUES SPECIFICATION
| Inner seat trim to seat frame |
Oval-head screw
Replace screw. |
tightening torque |
3.3 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|