Install the kinematics at the bottom left

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Insert and position the kinematics (2).
Ensure that the guide pin (1) is correctly positioned in the guide of the link disk (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the kinematics.

Tighten down screws (2).

TIGHTENING TORQUES SPECIFICATION

Heater/air conditioner
Screw	Tightening torque	1.2 Nm

Engage the deflection lever (4).
Ensure that the deflection levers (4) audibly engage.
Position the coolant pipe (3).
Attach the cable in the wire guide (1).

Courtesy of BMW OF NORTH AMERICA, INC.