Installing an damper weight on the spring strut

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following step(s) must be performed if the specified component(s) is/are installed.

Position the damper weight (2) with the flattened side parallel to the spring strut.
Replace the screw (1).
Parts: Screw

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Damper weight to spring strut
M8 Replace screw.	Joining torque	28 Nm
	Angle of rotation	90°

Courtesy of BMW OF NORTH AMERICA, INC.