Install front axle differential
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Replace O-ring (1).
Parts: O-ring
- Coat the O-ring (1) with front axle differential oil.
- Position front axle differential (3).
- Make sure marked screws are installed in correct installation locations:
- Bolts (1) M12x55
- Bolt (2) M12x105
- Tighten down screws (1) and (2).
TIGHTENING TORQUE SPECIFICATION
| Front axle final drive to motor oil pan | ||
|---|---|---|
| M12 | tightening torque | 140 Nm |