Check the position of the intake camshaft at cylinder 3 and 4
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Check
- Check the position of the intake camshaft at cylinder 3 and 4.
To remove the torsion springs on cylinders 3 and 4, the camshaft sensor wheel (1) of the intake camshaft must be in the position shown.
Result
» The camshaft sensor wheel (1) of the intake camshaft is not in the position shown.
Measure
- Turn engine on the vibration damper using special tool 0 493 380 (11 6 480) until the camshaft sensor wheel (1) of the intake camshaft is in the position shown.