Checking the abrasion protection foil for tail light on the rear side panel
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
Check
- The abrasion protection foil (1) must be properly adhered to the side panel (2).
Result
» The abrasion protection foil (1) is located on the tail light.
Measure
- Stick the abrasion protection foil (1) on the side panel (2) correctly and remove the abrasion protection foil (1) from the tail light.
Result
» The abrasion protection foil (1) is not located on the tail light.
Measure
- Stick the abrasion protection foil (1) on the side panel (2) correctly.
Adhering the abrasion protection foil for tail light on the side panel
- Position the abrasion protection foil on the side panel (2) as indicated by the marker lines.
Parts: Abrasion protection film
- Clean the adhesive area.CONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324 - Adhere the abrasion protection foil (1) with dimension A = 5.0 mm to the side panel (2).