Removing the pedal mechanism
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Materials harmful to health
.
Contact with fluids harmful to health!
Contact with fluids harmful to health!
- Note and follow safety instructions on containers.
- Conduct all work in appropriate personal protective equipment only.
Preliminary work
- Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
- Refer to REMOVING THE TRIM PANEL FOR PEDAL ASSEMBLY .
- Refer to REMOVING THE CLUTCH MASTER CYLINDER .
- Insert release tool 2 409 646 in the arrow direction between the brake pedal and the brake booster.
- Set support (1) of release tool 2 409 646 on the bearing bracket. If necessary, position the support by twisting the screw on the release tool tightly.
- Press release tool 2 409 646 in the arrow direction and lever out the brake pedal from the brake booster.
- Loosen screw (2).
- Release nuts (3).
- Remove pedal mechanism (1).