Install the centrifugal disc on the transfer box (VTG) (ATC 13-1)

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Replace protective cap (1).
Parts: prot. cap
Carefully tap the protective cap (1) with the special tool onto the transfer box 0 494 641 (27 1 380).

G14206088

Courtesy of BMW OF NORTH AMERICA, INC.

Replace centrifugal blade (1).
Parts: Centrifugal disc
Carefully tap the centrifugal disc (1) with a plastic hammer onto the transfer box (2).

G14206089

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE TRANSFER BOX (VTG) .
Refer to FASTENING THE PROP SHAFT (PARTIALLY REMOVED) .
Refer to INSTALLING TRANSMISSION CROSS MEMBER .
Refer to INSTALLING THE TRANSMISSION BEARING SUPPORT .
Refer to INSTALLING FRONT HEAT SHIELD .
Refer to INSTALLING THE REAR HEAT SHIELD .
Refer to INSTALLING THE LEFT THRUST FIELD .
Refer to INSTALLING TANK COVER .
Refer to INSTALLING EXHAUST SYSTEM .
Refer to INSTALLING THE CONNECTING SUPPORTS ON THE TUNNEL .
Refer to CONNECTING ALL BATTERY GROUND LEADS .