Installing the inner cover on the front seat
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Check the guides (1) of the cover (2) for damage. If necessary, replace the cover.
- Thread in the cover (2) at the arrows and position correctly.
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Inner cover on seat frame | ||
|---|---|---|
| Screw | tightening torque | 2.5 Nm |
Follow-up work
- Refer to INSTALLING DRIVER'S SEAT .