Remove clutch slave cylinder

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Materials harmful to health.
Contact with fluids harmful to health!

Note and follow safety instructions on containers.
Conduct all work in appropriate personal protective equipment only.

Preliminary work

Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .

Seal the hydraulic line (1) to the clutch slave cylinder with the special tool 0 491 256 (13 3 010) .

Courtesy of BMW OF NORTH AMERICA, INC.

Release the screws (1) and remove the clutch slave cylinder (2) with the holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove the fuse (1).
Remove the hydraulic line (2).
Remove clutch slave cylinder.

Courtesy of BMW OF NORTH AMERICA, INC.