Removing anti-roll bar link

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Vehicle may slip off the vehicle hoist if the vehicle hoist is handled incorrectly.
Danger! Immobilization period-threatening injuries!

Observe safety instructions on raising the vehicle using a vehicle hoist.
For additional information see: 00... RAISE THE VEHICLE USING A VEHICLE LIFT .

Preliminary work

Refer to REMOVING THE REAR LEFT WHEEL .

Loosen screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Pull anti-roll bar link (1) a little to the rear and pull out screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Protect the shock absorber from damage with cloth (1).
Release nut (2). Counter support it using wrench (3) with a Torx socket.
Remove the anti-roll bar link (4).

Courtesy of BMW OF NORTH AMERICA, INC.