Installing the anti-roll bar link
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Position the anti-roll bar link (4) on the anti-roll bar.
- Protect the shock absorber from damage with a cloth (1).
- Replace nut (2).
Parts: Nut
- Tighten nut (2). Counter support with a wrench (3) with Torx socket.
TIGHTENING TORQUE SPECIFICATIONS
| Rear anti-roll bar link on anti-roll bar | ||
| M10 Replace nut. | Tightening torque | 56 Nm |
- Replace the screw (2).
Parts: Screw
- Insert the screw (2) and position the anti-roll bar link (1) on the wheel carrier.
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Rear anti-roll bar link to wheel carrier | ||
| M10 Replace screw. | Tightening torque | 56 Nm |
Follow-up work
- Refer to INSTALLING THE REAR LEFT WHEEL .