Install the Soft-close motor
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Engage the soft-close motor (1) at the holders (2) in the direction of the arrow.
- Connect and lock the connector (1).
- Clip the Bowden cable (2) in at the holders on the tail panel.
- Attach Bowden cable (1) to tailgate lock (2).
Follow-up work
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL, LEFT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .