Removing the eccentric shaft (cylinder head removed)

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .

Adhere to the utmost cleanliness.
Protect components from contamination e.g. by covering.
Close off line connections with seal plugs.

Fig 1: Bearing Caps Screws Loosening Sequence

Courtesy of BMW OF NORTH AMERICA, INC.

Remove all screws (marks).
Guide out and remove bearing brackets (1) to (6) (arrows).
Set down bearing brackets (1) to (6) neatly in special tool 0 495 105 (11 4 480) .
Feed out and remove bearing cap (A) .
Place bearing cap (A) neatly in special tool 0 495 105 (11 4 480) .
Feed the air eccentric shaft (1) out toward the top and remove.

Courtesy of BMW OF NORTH AMERICA, INC.