Remove the seat cover with the cushion (M CFRP bucket seat)

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.

Protect working area.
Handle tools and components carefully.

Unclip the clips (1) with a suitable tool carefully.
Unclip the seat cover (2) in the marked area with a suitable tool.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The operations shown only for one side must be carried out on both sides.
Unclip the seat cover (1) in the marked area with a suitable tool.
Feed out the seat cover (1) from the retaining tabs (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip the seat cover (1) in the marked area.
Unclip the cable clip (2) .
Unlock and disconnect the corresponding plug connection of the cable (3) for seat heating.

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip the clip (1) of the seat cover (2) from the seat mechanism (3)
Guide out the cable (4) for the seat heating.

Courtesy of BMW OF NORTH AMERICA, INC.
Remove the seat cover (1) together with the cushion.

Courtesy of BMW OF NORTH AMERICA, INC.