LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2024 >> M240i >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Maintenance And General Information -- Repair M4 (G82 & G83)) >> 00 00 Maintenance >> 00 00 610 Engine oil service (M4 2021-2023) >> Removing the oil filler cap

Removing the oil filler cap

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Hot fluids  .
Risk of scalding! 
  • Conduct all work in the vehicle wearing appropriate personal protective equipment only.
WARNING: Hot surfaces  .
Risk of burning! 
  • Perform all work only on components that have cooled down.
NOTE: RISK OF DAMAGE 
Contaminant or foreign body  .
Contamination can result in malfunctions, loss of function or leaks  .
  • Adhere to the utmost cleanliness.
  • Protect components from contamination e.g. by covering.
  • Close off line connections with seal plugs.
NOTE: RISK OF DAMAGE 
Engine damage caused by excessively filling the engine with motor oil  .
Filling an excessive quantity of motor oil may cause engine damage  .
  • Observe the exact motor oil filling capacity.
  • Allow engine oil to drip off when draining.
NOTE: TECHNICAL INFORMATION 
Make sure the vehicle is operating temperature for engine oil service (engine oil temperature > 70°C).
NOTE: TECHNICAL INFORMATION 
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
NOTE: RISK OF DAMAGE 
Contaminant or foreign body  .
Contamination can result in malfunctions, loss of function or leaks  .
  • Adhere to the utmost cleanliness.
  • Protect components from contamination e.g. by covering.
  • Close off line connections with seal plugs.
G15328930Courtesy of BMW OF NORTH AMERICA, INC.