Installing the emergency horn with tilt alarm sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position the emergency horn with tilt alarm sensor (2) and tighten the nut (1) .
TIGHTENING TORQUES SPECIFICATION
| Emergency siren to holder | ||
|---|---|---|
| Nut | Tightening torque | 6 Nm |
Follow-up work
- Refer to INSTALLING THE REAR LANE CHANGE WARNING SENSOR .
- Refer to INSTALLING THE SIDE BUMPER GUIDE .
- Refer to INSTALLING THE REAR BUMPER COVER .
- Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .