Removing the dust plate
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
The work must be performed with vehicle care to prevent component damage.
The work must be performed with vehicle care to prevent component damage.
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
Version A: Removing the dust plate
- Release the dust plate (1) from the drive flange (3) in arrow direction with a hydraulic press (2) and the special tool 0 496 357 (31 5 272) and remove.
Version B: Removing the dust plate
- Release and remove the small dust plate (1) and the large dust plate (2) from the drive flange (4) in arrow direction with a hydraulic press (3) and the special tool 0 496 357 (31 5 272) .