Install the backrest cover of the rear seat backrest
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Position the backrest cover on the cushion.
- Secure all trim wires with clamps.
- Replace the clamps (2).
Parts: Clamps
- Insert the clamp (2) with the special tool 0 492 668 (52 0 050) .
- Clasp the trim wire (3) of the cushion (1) and the trim wire (4) of the backrest covering with the clamp (2) and bend the clamp (2).
Follow-up work
- Refer to INSTALLING THE BACKREST FRAME FOR THE REAR SEAT BACKREST ON THE LEFT .
- Refer to INSTALLING THE GUIDE SLEEVE FOR THE REAR HEAD RESTRAINT .
- Refer to INSTALLING THE REAR PANEL ON THE LEFT REAR SEAT BACKREST .
- Refer to INSTALLING THE HEAD RESTRAINT AT THE REAR .
- Refer to INSTALLING THE CENTER REAR SEAT BACKREST .
- Refer to INSTALLING THE LEFT REAR SEAT BACKREST .
- Refer to INSTALLING BACKREST SIDE SECTION, LEFT .
- Refer to INSTALLING THE REAR SEAT BENCH .