Installing the inner seat trim (M CFRP bucket seat)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Damage of high-quality surfaces .
Plastic wedges can damage high-quality surfaces .
Damage of high-quality surfaces .
Plastic wedges can damage high-quality surfaces .
- Protect surfaces from damage.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
Check
- Check all detents at the outer seat trim (1) for damage.
Result
» Detent is damaged.
Measure
- Replace the outer seat trim.
- Correctly position the outer seat trim (1) in the arrow direction.
- Carefully clip the outer seat trim (1) into the clips (2).
Follow-up work
- Refer to INSTALLING DRIVER'S SEAT .