Install the seat mechanism for the front seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Position the backrest (3) on the seat mechanism (2).
- Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Backrest frame on seat mechanism M10 tightening torque 38 Nm - Insert the lower strap (1) in this area (2) and fold it forwards.
- Tighten down screw (3).TIGHTENING TORQUES SPECIFICATION
Lower strap to seat mechanism M6 Tightening torque 8 Nm - Attach the cable clip (4).
- Insert the wiring harness (3).
- Secure the cable clips (1).
- Clip in the connector housing (2).
- Connect the connectors for the motors (1).
- Clip in the connector housing (2).
Follow-up work
- Refer to FITTING THE SEAT COVER WITH THE UPHOLSTERY FOR THE FRONT SEAT .
- Refer to INSTALLING THE SUPPORT FOR THE OUTER COVER ON THE FRONT SEAT .
- Refer to INSTALLING OPERATING UNIT FOR THE SEAT ADJUSTMENT .
- Refer to INSTALLING OUTER COVER ON FRONT SEAT .
- Refer to INSTALLING INNER COVER ON FRONT SEAT .
- Refer to INSTALLING FRONT SEAT .