LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2024 >> M240i >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Propeller Shaft -- Repair M5 (F90)) >> 26 00 Propeller Shaft, General Information >> Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive (M5 2018-2022)

Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive (M5 2018-2022)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: If the vehicle has been shifted under engine power with a non-engaging drive system (e.g. faulty front prop shaft, or one output shaft is no longer engaging with the drive flange, rear axle differential faulty/no power transmission), it is mandatory to calibrate the transfer box after having repaired the prop shaft/output shaft(s).

Carry out calibration after having completed the repair using the diagnostic system and information system, in control unit function -

Functional check - Transfer box.

scientia non olet · About LEMON Manuals