Removing the intake camshaft of cylinder bank 2
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Mark the guide bearing shells of the intake camshaft from (E1)
to (E5)
as shown in the graphic.
- Release the screws of the guide bearing with the item numbers (1)
and (4)
in several steps by half a rotation at a time.
- Remove the guide bearing shells.
- Remove the intake camshaft.
 Courtesy of BMW OF NORTH AMERICA, INC.
|