Installing the rear ventilation grille
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Check whether all clamps (1) are present and correctly seated. Replace if necessary.
- Attach ventilation grille.
- Connect, lock and install the connector (1) in the holder.
- If necessary, connect and lock any additional connectors.
- Ensure correct cable routing.
- Carefully insert the ventilation grille (1) in the center console starting in the upper area and engage it at the detents (2) in the lower area.
- Install the trim (1) and clip it in at the clamps (2).