Install the knock sensors on the right
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Position the knock sensors (1).
- Tighten down screws (2).
TIGHTENING TORQUES SPECIFICATION
| Knock sensor | ||
| M8x30 screw | Tightening torque | 21.4 Nm |
- Connect and lock the plug connections (3).
Follow-up work
- Refer to INSTALLING THE COVER OF THE STEERING ASSEMBLY ON THE RIGHT .
- Refer to INSTALLING THE STIFFENING PLATE .
- Refer to INSTALLING FRONT UNDERBODY PROTECTION .
- Refer to INSTALLING THE FRONT RIGHT WHEEL .
- Refer to CONNECTING BATTERY GROUND LEAD .