Prepare for the installation of the brake booster
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Check the retaining lugs of the holding clip (1) in the marked area (2) for damage and replace the holding clip where required.
- In all the G2x vehicles with automatic transmission:
Before installing the new holding clip, press ball socket (1) into holding clip (2) .
Ball socket (1) must engage perceptibly.
- Replace the gasket (1)
on the brake booster.
Parts: Gasket
- Thoroughly clean the sealing surfaces on the brake booster and on the firewall.