Mount rear brake guard plate

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Install brake guard plate (2) .
Replace screws (1) .
Parts: Screws
Insert screws (1) and tighten.

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Brake protection plate on the rear wheel carrier
M6x12 Replace screw.	tightening torque	8 Nm

Follow-up work

Refer to INSTALLING REAR BRAKE DISCS .
Refer to GREASING BRAKE PADS, BRAKE ANCHOR PLATE AND BRAKE CALIPER WITH BRAKE PAD PASTE .
Refer to INSTALLING REAR BRAKE PADS .
Refer to INSTALLING THE REAR BRAKE PAD WEAR SENSOR .
Refer to INSTALLING REAR WHEEL ON THE LEFT AND RIGHT .
Refer to STARTING-UP OR BEDDING IN BREAK-IN OF NEW BRAKE PADS AND BLADES (REAR BRAKE) .