Remove the seat cover with the cushion (M CFRP bucket seat)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Unclip the clips (1) with a suitable tool carefully.
- Unclip the seat cover (2) in the marked area with a suitable tool.NOTE: The operations shown only for one side must be carried out on both sides.
- Unclip the seat cover (1) in the marked area with a suitable tool.
- Feed out the seat cover (1) from the retaining tabs (2).
- Unclip the seat cover (1) in the marked area.
- Unclip the cable clip (2).
- Unlock and disconnect the corresponding plug connection of the cable (3) for seat heating.
- Unclip the clip (1) of the seat cover (2) from the seat mechanism (3)
- Guide out the cable (4) for the seat heating.
- Remove the seat cover (1) together with the cushion.