Installing the luggage compartment wheel arch trim panel on the right

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Insert the luggage compartment wheel arch trim panel (3) and connect it with the corresponding connector.
Secure expanding rivet (2).
Insert the cover (1).
Make sure the luggage compartment wheel arch trim panel (3) is correctly fitted at the edge protection of the trunk lid.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the lashing point (2).

Tighten the associated bolt.

TIGHTENING TORQUE SPECIFICATIONS

Lashing point to body
tightening torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in the trim (1).

Follow-up work

Refer to INSTALLING LOADING EDGE TRIM .
Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
Refer to REMOVING REAR SEAT BACKREST .
Refer to INSTALLING THE REAR SEAT BENCH .
Refer to INSTALLING RIGHT BACKREST SIDE SECTION .