Installing headlining (with SA403 glass roof)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION .
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
Preliminary work
- Refer to REMOVING A-PILLAR TRIM PANEL ON THE LEFT AND RIGHT .
- Refer to REMOVING COUNTER SUPPORTS FOR SUN VISOR ON LEFT AND RIGHT .
- Refer to REMOVING THE LEFT AND RIGHT SUN VISOR .
- Refer to REMOVING BOTH VANITY MIRROR LIGHTS .
- Refer to REMOVING RIGHT HANDS-FREE MICROPHONE .
- Refer to REMOVING THE LEFT HANDS-FREE MICROPHONE .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
- Refer to REMOVING THE INTERIOR REARVIEW MIRROR .
- Refer to REMOVING REAR INTERIOR ROOF LIGHT .
- Refer to REMOVING THE TOP LEFT AND RIGHT B-PILLAR TRIM PANELS PARTIALLY .
- Refer to REMOVING BOTH C-PILLAR TRIM PANELS .
- Refer to REMOVING ALL GRAB HANDLES .
Precondition
Glass roof is open.
The front seats have been fully adjusted towards the bottom.
The front seat backrests have been fully adjusted towards the rear.
- Guide the headlining (1) into the relevant edge protection (2) with the help of a support person.
- Clip in the headlining using the clips (1).
- Secure the frame (1) to the roof using the clips (2).
- If necessary, clip in the cable clip into the frame (1).
- Secure the frame (1) to the roof using the clips (2).
- Clip in trim (1) using clips (2).
- Tighten down screw (1).TIGHTENING TORQUE SPECIFICATIONS
Headlining 2.5 Nm - Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Headlining to panorama glass roof 1.2 Nm
Follow-up work
- Refer to INSTALLING ALL GRAB HANDLES .
- Refer to INSTALLING BOTH C-PILLAR TRIM PANELS .
- Refer to PARTIALLY INSTALLING THE B-PILLAR TRIM PANELS AT THE TOP LEFT AND RIGHT .
- Refer to INSTALLING REAR INTERIOR ROOF LIGHT .
- Refer to INSTALLING THE INTERIOR REARVIEW MIRROR .
- Refer to INSTALLING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INSTALLING THE LEFT AND RIGHT SUN VISORS .
- Refer to INSTALLING BOTH VANITY MIRROR LIGHTS .
- Refer to INSTALLING COUNTER SUPPORTS FOR THE SUN VISOR ON LEFT AND RIGHT .
- Refer to INSTALLING THE RIGHT HANDS-FREE MICROPHONE .
- Refer to INSTALLING LEFT HANDS-FREE MICROPHONE .
- Refer to INSTALLING LEFT AND RIGHT A-PILLAR TRIM PANEL .