Install the headlining on the left or right (with SA403 glass roof)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION .
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
Preliminary work
- Refer to REMOVING A-PILLAR TRIM PANEL .
- Refer to REMOVING THE COUNTER SUPPORT FOR THE SUN VISOR .
- Refer to REMOVING SUN VISOR .
- Refer to REMOVING THE VANITY MIRROR LIGHT AT THE FRONT LEFT OR RIGHT .
- Refer to REMOVING THE LEFT HANDS-FREE MICROPHONE .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
- Refer to REMOVING THE INTERIOR REARVIEW MIRROR .
- Refer to REMOVING REAR INTERIOR ROOF LIGHT .
- Refer to REMOVING THE B-PILLAR TRIM PANEL UPWARDS .
- Refer to REMOVING C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
Precondition
Glass roof is open.
- Feed in the headlining on the relative edge protection.
- Secure the frame (1) to the roof using the clips (2).
- If necessary, clip in the cable clip into the frame (1).
- Clip in the headlining using the clips (1).
- Secure the frame (1) to the roof using the clips (2).
- Clip in trim (1) using clips (2).
- Tighten down screw (1).TIGHTENING TORQUE SPECIFICATIONS
Headlining 2.5 Nm - Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Headlining to panorama glass roof 1.2 Nm
Follow-up work
- Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE UPPER B-PILLAR TRIM PANEL .
- Refer to INSTALLING REAR INTERIOR ROOF LIGHT .
- Refer to INSTALLING THE INTERIOR REARVIEW MIRROR .
- Refer to INSTALLING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INSTALLING THE SUN VISOR .
- Refer to INSTALLING THE COUNTER SUPPORT FOR THE SUN VISOR .
- Refer to INSTALLING THE VANITY MIRROR LIGHT AT THE FRONT LEFT OR RIGHT .
- Refer to INSTALLING LEFT HANDS-FREE MICROPHONE .
- Refer to INSTALLING A-PILLAR TRIM PANEL .