Install rear side window glass

• Insert side window glass (2) twisted by 90° to the front, into the door from the top.
• Insert the side window glass (2) on to the top of the door.
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Side window, rear
  screw	Tightening torque	2.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Side window, rear
  screw	Tightening torque	7.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the window guide rail (2) in the door.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Window guide rail
  screw	Tightening torque	2.3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the rubber window seal (1) in the window guide rail (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to PARTIALLY INSTALLING THE COVER ON THE WINDOW FRAME .
• Refer to INSTALLING THE WINDOW CHANNEL STRIP OF THE INNER REAR DOOR .
• Refer to INSTALLING REAR DOOR TRIM PANEL .
• Refer to ATTACHING THE COVER TO THE DOOR HANDLE .
• Refer to INSTALLING WINDOW CHANNEL STRIP ON THE REAR DOOR .
• Refer to INSTALLING THE REAR WINDOW FRAME TRIM .