Flush and vent the rear axle brake circuit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for right component only. The procedure on the left side is identical.
- Begin with the flushing at the right rear.
- Connect the vent hose with the collecting vessel to the bleed valve (1) on rear right brake caliper.
- Open the bleed valve (1) and purge it until clear, bubble-free brake fluid emerges.
- Close bleed valve.
TIGHTENING TORQUES SPECIFICATION
| Rear bleed valve | ||
| Bleed valve | Tightening torque | 10 Nm |
- Carry out the same procedure on the rear left wheel brake.