Flushing and bleeding the front axle brake circuit

• Start flushing at the right front. 
• Connect the air bleeder hose with the collecting vessel to the bleed valve (1) on front right brake caliper.
• Open the bleed valve (1) and purge it until clear, bubble-free brake fluid emerges.
• Close bleed valve (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Bleed valve
  tightening torque	10 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to DISCONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .